FREE SHIPPING ON ALL EBIKES
(866) 300-3311 info@aventon.com

Aventon Support Center

    Sorry, we didn't find any relevant articles for you.

    Send us your queries using the form below and we will get back to you with a solution.

    Getting Started

    You can find all the information found below in a downloadable Quick Start Guide.

    Getting Started

    First, turn on the power switch on the battery itself. Then press and hold the “M” button on the control pad for 3 seconds to power up the system. While the bike and display are powered on, press and hold “M” for 3 seconds to turn off.

    The Pace 500 E-Bike offers pedal assist. When using pedal assist, an electric motor supplements the rider’s own effort. To use the pedal assist, simply start pedaling, then tap the “UP” or “DOWN” arrows to increase or decrease the amount of pedal assist. Pedal assist will engage at speeds up to 28 MPH.

    The Pace 500 E-Bike is equipped with a throttle, which is mounted near the rider’s left thumb, to propel the bike without pedaling. The throttle can propel you at speeds up to 20 MPH.

    Throttle On Demand Models: If you have the "Throttle On Demand" model, you can engage the throttle anytime including from a complete stop while in PAS 1 through 5. However, we strongly encourage you to pedal first before engaging the throttle. 

    Throttle After Pedal Models: If you have the "Throttle After Pedal" model, you can engage the throttle after you begin pedaling. Once the bike is moving on throttle power, you can stop pedaling entirely and use your thumb to control the speed of the bike.

    The motor stops when you: stop pedaling, squeeze the brake levers, or release the throttle. Simply start pedaling again to re-engage the motor.

    Battery & Charging

    We recommend charging the battery off the bike indoors, in moderate temperature conditions. To charge the battery, plug the charger into the charging port and then connect the charger to a wall outlet. The LED indicator light will be red when charging and will turn green when charging is complete.

    Maintenance & Service

    Properly maintaining your Pace 500 ensures it’s longevity and smooth operation. Here is our recommended ebike maintenance guide and schedule. Before assembling your bike, please watch the “How To Assemble” video. If you have questions during the assembly process, please contact Aventon at (866) 300-3311 or email info@aventon.com.

    Safety

    You should wear an approved bicycle helmet every time you ride a bicycle, regardless of the legal requirement to do so. Additionally, some jurisdictions require helmet use when riding Class III E-Bikes like the Pace 500. You should comply with local law when riding your Aventon bicycle. Check out our Safety section for more information. 



    Was this article helpful?

    Still can't find what you are looking for?

    Our award-winning customer care team is here for you.

    Contact Support